SURFB - SURFBENT Nose Protector



Category: Safety Gear / Board protection

Surfbent – windsurf Board protection - ideal for windfoiling, windsurfing and school use.
This board protector was designed to help minimize damaging the nose of your windsurfing board. Whether you are a beginner learning the ropes of windsurfing or an Expert freestyler perfecting new moves, the surfbents unique design will keep you on the water vs in repair shop. Surfbent states: In an uncontrolled fall of the rig or in extreme situations such as a spin fall, the rig hits the protector first. In this contact, the resulting energy is degraded by deformation of the power joint (elastomer material). This can better protect the entire board. An optimized, geometric design and simulation of the design structure saved material, reduced weight and at the same time achieved the required strength and function.

- 250 GRAMS
- COMPATIBLE WITH MAST FEET UP TO 11 CM / 4 3/8" Diameter base.
- CENTRAL WEIGHT DISTRIBUTION - Mass is close to deck of board.
- SUPPORT AT WATER START – shape of the protector and the resulting lift-up effect (lifting the sail towards the start position).
- UNRESTRICTED TRIM - Setting range of the mast track remains intact.
- At the mast foot, the 1-bolt friction disc is replaced by the protector and mounted as usual.
- Soft pad under Surfbent – protects board from paint damage and improves contact / grip to board.
- Best with 1-bolt tendon bases, but works with rubber and mechical as well.
- It can be modified to fit 2-bolt bases as well.
- Works best with boards 250cm / 8'3" and shorter.
- Color options; Ocean (blue) or Storm (dark grey)

Compatible Bases:
RRD mechanical 1-bolt, North/ Duotone I-base, Duotone EPX.Base+Tendon, Chinook 2-bolt (w/modification of surfbent holes needed - very snug fit), Tekknosport tendon and rubber, Nautix 1-bolt, Unifiber racebase, F2 Wave base, Ascan Base Pro. (11 CM / 4 3/8" Diameter bases or smaller)
* Deck washer Must Be Removed from all of these bases to fit.

The selected plastic with a Shore hardness of 70-80 proved in the course of the test phases as significantly better choice of material. Pad protects the area below the WBP from paint damage. In addition, the pad improves the stable fixation of the WBP on the board. Another advantage is that the guide part must absorb less forces. The load limit of the predetermined breaking point is thus achieved less quickly.



SURFBENT Nose Protector

New windsurf board protector – keeps your rigs mast from slamming into the nose of your board. Excellent for new short boarders, Windfoilers and freestylers.
Product Name MSRP Price Qty
Contact Us
In Stock