Severne Redwing Hydrofoil Complete

Severne
SKU:
SVWF25RDWG
$1,179.00 - $1,269.00
(No reviews yet)
Severne Redwing foil sets target Windfoil use. Great designs for all ability riders from beginner to advanced and experts. This foil set includes a bag, tool and foil set. 3 size option. Carbon wings.
Adding to cart… The item has been added
Ask the Staff

Severne Redwing Foil set

Foil Category: Windfoil, Carbon wings, Alloy mast and fuse.

Severne Redwing Foil – Ideal foils for windfoiling – addressing all skill levels.
The Severne Redwing foils are a well designed windfoiling set.  Designed to get people windfoiling quickly, easily, safely and with as much fun as possible. By directly understanding all the variables, Severne has made the design choices to deliver a foiling experience that will expand your windsurfing world. Windfoiling has the potential to DOUBLE your time on the water. The Redwing series Easy enough for your first flights, the RedWing 1400 is fun enough to keep you foiling into jibes, 360’s and beyond. Cruise speed is set at 20knots for freeride foil performance. The 1800 has a higher aspect ratio front wing that can further advance earlier lift-off and great efficiency. The 1000 set has higher speed potential and favors stronger wind conditions with its higher aspect front wing and smaller rear wing.  All sets include a 95 cm fuselage and a 90 cm mast.
Safety -  Foiling is more fun when you’re not bleeding. So Severne considered every component and how it’s user friendliness could be improved. All wingtips have rounded tips and are curved down, away from kicking feet. Wing covers are designed to stay on during setup, minimizing accidents while on land. 90cm vertical gives enough height for correct technique, minimizing both touchdowns and breaches.  Rigid aluminum hardware delivers consistent, reliable lift which increases control.
Simplicity - Rigging up has never been the most fun part of windsurfing. Adding a foil can increase the complexity, so we have focused on making it as easy as possible. Minimal bolts mean less to install. Only 2 different bolt types – short bolts for the wings, and long ones for the vertical. A single tool required. The 5mm Hex Key was selected for its long-term reliability, the abundance of compatible tools (many sails use this size for batten tension), and easy replacement of bolts. Plug in connections between fuselage/vertical and fuselage/front wing.
Reliability - If you’re flying half a meter out of the water, you don’t want that front wing moving around underneath you. Rigidity is the key to holding the wings in a consistent position. Rigidity allows you to lock in and windsurf on the foil, rather than riding a bucking bronco. Vertical geometry maximizes stiffness. 19mm thick x 145mm wide. Much stiffer both longitudinal and torsional than most carbon verticals. Spigot on fuselage locks into the vertical section. Fuselage uses straight sections for directional stability, and to maximize the strength/weight ratios. 4x connection surfaces on the front wing connection reduces any movement.
Alloy mast – Stiffer than carbon - Vertical GEOMETRY MAXIMISES STIFFNESS. 19mm thick x 145mm wide. Much stiffer longitudinal and torsional than most carbon masts.

Features:
- Windsurf-foil specific.
- 3 sets options: 1800, 1400, 1000.
- 1800 – favors light to moderate wind conditions. Very efficient design.  
- 1400 – favors learning and all round performance and easy jibing.
- 1000 – favors higher winds - greater speeds and increased maneuverability.
- Modular system – interchangeable wings, fuselage, mast – for personalized setups.  
- Darkweb Technology – Internal Carbon Stringer Wing Frame – increase torsional stiffness.   
- Wing outlines have been designed with safety in mind.
- All wing tips are rounded and curved downwards away from kicking feet.
- Hex-coil inserts on fuse and mast threading.
- Hex-5 Key with M8 Bolts – simple assembly and more strength.
- Alloy 90 cm mast – stiff longitudinal and torsional – for maximum foil control.
- Deep Tuttle base – fits all brand foil boxes.
- Alloy Fuse – is 95 cm long for great flight stability and control.
- Includes Padded Bag / cover combination for easy transport and travel.
 

Sizes / Specs:
1000, 1400, 1800
1000 – Front wing = 1000 cm2 (73.9 cm span), rear Stab = 250 cm2 (42,6 cm spam), 95 fuse, 90 cm mast.
1400 – Front wing = 1400 cm2 (76.2 cm  span), rear Stab = 350 cm2 (48 cm spam), 95 fuse, 90 cm mast.
1800 – Front wing = 1800 cm2 (90.4 cm span ), rear Stab = 350 cm2 (48 cm spam), 95 fuse, 90 cm mast.

Construction:
Carbon wings, Alloy Fuse and mast.  The Carbon wings feature Darkweb Technology – with Carbon Stringer Wing Framing the increase torsional stiffness.  Alloy Fuse and mast for maximizing Stiffness longitudinally and torsionally.

SKU SVWF25RDWG