Only left in stock.
Slingshot Phantasm Stabilizer V1
MSRP:
$308.00 - $404.00
$307.00 - $339.00
Slingshot Phantasm Jack Plate V1
$99.00
$208.88
(You save
$109.88
)
(No reviews yet)
Write a Review
Slingshot Phantasm Jack Plate V1
The Slingshot Phantasm Jack Plate V1 adapter plate set allows use of the Phantasm foils with any medium or Deep Tuttle Box board for wind-foilng use. Includes: Jack Plate V1, TU and DT adapters and hardware.
Category: Wind / Wing/ SUP Foiling Parts – Slingshot Mount
Slingshot Jack Plate V1 - Convert Phantasm masts to Tuttle / Deep Tuttle Foilbox
This new adapter allows you to use your Phantasm foil with either a medium or Deep Tuttle box board. Whether the board has a foil box or not – this plate reinforces the bottom of the board for adequate support. It is also a needed part to allow Phantasm foils to be used on both standard and Wide Slingshot masts options for Foilbox attachment use. It's as simple as attaching either of the supplied medium or deep Tuttle adapters to the Jack Plate and then bolting the Jack Plate onto your Phantasm pedestal. The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.
Features:
- Jack Plate V1.
- Both Tuttle and Deep Tuttle adapter included.
- Attaches directly to the top of your Phantasm top Plate / Pedestal.
- Works on Phantasm Standard and Wide Masts.
- Use your Phantasm foil with any Tuttle Box board
- Adds 1cm of length to your mast.
-You can move the Tuttle adapter forward or back five different locations on the Jack Plate to perfectly place your foil's center of lift.
Jack Plate V1 Includes:
Phantasm Jack Plate, Medium Tuttle adapter, Deep Tuttle adapter, Jack Plate to Tuttle Adapter hardware, Jack Plate to Phantasm Pedestal hardware
* Please Note about the Tu and DT adapters - The Tuttle has 10mm threads for securing to board. You will need the adapter set HG M6 Titanium SS18711023 to be able to secure when using 6mm fin / foil screws. Sold Separately.
The DT adapter has 8mm threaded inserts. To use this - you will need 8mm fin screws and likely need to drill out the fin box holes to 8mm in order to secure the DT adapter and foil into your Foil box.
The Full Deep Tuttle adapter requires M8 Bolts to attach to your board, you can easily widen the holes on your board with a drill. The actual shafts for the screws in Deep Tuttle boxes are M9 and only a thin layer covers the wider screw shafts. See our instructional video here: https://www.youtube.com/watch?v=TSnXbwtfEys
Slingshot Jack Plate V1 - Convert Phantasm masts to Tuttle / Deep Tuttle Foilbox
This new adapter allows you to use your Phantasm foil with either a medium or Deep Tuttle box board. Whether the board has a foil box or not – this plate reinforces the bottom of the board for adequate support. It is also a needed part to allow Phantasm foils to be used on both standard and Wide Slingshot masts options for Foilbox attachment use. It's as simple as attaching either of the supplied medium or deep Tuttle adapters to the Jack Plate and then bolting the Jack Plate onto your Phantasm pedestal. The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.
Features:
- Jack Plate V1.
- Both Tuttle and Deep Tuttle adapter included.
- Attaches directly to the top of your Phantasm top Plate / Pedestal.
- Works on Phantasm Standard and Wide Masts.
- Use your Phantasm foil with any Tuttle Box board
- Adds 1cm of length to your mast.
-You can move the Tuttle adapter forward or back five different locations on the Jack Plate to perfectly place your foil's center of lift.
Jack Plate V1 Includes:
Phantasm Jack Plate, Medium Tuttle adapter, Deep Tuttle adapter, Jack Plate to Tuttle Adapter hardware, Jack Plate to Phantasm Pedestal hardware
* Please Note about the Tu and DT adapters - The Tuttle has 10mm threads for securing to board. You will need the adapter set HG M6 Titanium SS18711023 to be able to secure when using 6mm fin / foil screws. Sold Separately.
The DT adapter has 8mm threaded inserts. To use this - you will need 8mm fin screws and likely need to drill out the fin box holes to 8mm in order to secure the DT adapter and foil into your Foil box.
The Full Deep Tuttle adapter requires M8 Bolts to attach to your board, you can easily widen the holes on your board with a drill. The actual shafts for the screws in Deep Tuttle boxes are M9 and only a thin layer covers the wider screw shafts. See our instructional video here: https://www.youtube.com/watch?v=TSnXbwtfEys
| SKU | SSWF22122830000 |
|---|
- Experience Level:
- Beginner
- Experience Level:
- Progressing Beginner
- Experience Level:
- Intermediate
- Experience Level:
- Advancing Intermediate
- Experience Level:
- Advanced
- Experience Level:
- Expert
Related Products
-
-
Sale
Slingshot Phantasm Fuselage V1
MSRP: $270.00 - $296.00$229.00 - $344.43 -
Slingshot Phantasm Aluminum Mast V1
$339.00 - $409.99 -
Slingshot Phantasm Aluminum Wide Mast V1
$439.00 - $442.99
